Aluminum Alloy 3003 is a commercially pure aluminum with the addition of manganese. Alloy 3003 is the most widely used aluminum alloy due to it\'s excellent characteristics. The addition of manganese increases the strength and Alloy 3003 is 20% stronger than alloy 1100 . As with alloy 1100, alloy 3003 has excellent corrosion resistance and
3003 3003 AL-Mn ，， （） ，， ：， ，，，，
3003(Al--Mn) ，。 H24：、、。 0.2mm500mm,200mm,16m,0.2mm,200mm
3003 - ： 3003al-mn,,(),,:,,,,,.
3000 －－AL x Mn 1、 %，、、。、、、、 2、
AL 3003 AA 3003 A 3003 B 3003 A. . ¥ 35.0. 1 .
The Aluminum / Aluminium 3003 alloy has good weldability. Heat Treatment. The Aluminum / Aluminium 3003 alloy does not respond to heat treatment. Forging. The Aluminum / Aluminium 3003 alloy can be forged at 260 to 510°C (500 to 950°F) Hot. The Aluminum / Aluminium 3003 alloy is hot worked at 260 to 510°C (500 to 950°F). Cold
3003 3003 AL-Mn ，， （） ，， ：， ，，，，
3003 Revised October 2021 Page 1 of 3 atlassteels.au Alloy 3003 is a non-heat-treatable 1.2% manganese, 0.12% copper alloy commonly available in flat rolled coil, sheet and plate from a wide range of producing mills. It is one of the most commonly used of all aluminium alloys, essentially commercially pure aluminium
： Si：0.60 Fe:0.70 Cu： 0.05-0.20 Mn：1.0-1.5 Zn：0..10 Al： 3003 ： σb(MPa))140-180
Al 3003 alloys were joined through GTAW by melting fabricated nanocomposite filler metal. TiO 2 nanoparticles were chosen as reinforcement from 0 to 3 wt%. Roll bonding is desired owing to the proper distribution of TiO 2
AL-01-B30 | EMC -
3003，3003H24、H22、H16，3003，25，！ 3003AL-Mn，3。、%
1 ：3003AL-Mn，，（），，：，，，，，
3000 －－AL x Mn 1、 %，、、。、、、、 2、